Device to cover the sight on hunting and sports bows

During the last few years the compound bow has become more and more prominent in archery. A compound bow is a bow in which cables transmit the force based on a pulley block principle. These technically sophisticated bows are usually equipped with optical sights. The sights are firmly fastened to the bow and the connection can be adjusted by screws which allow adjustment of the sights to different distances.

These sights consist of a mount in which there is an optical lens. This lens is marked in the middle with a dot or reticule and, due to the enlargement, acts as an aiming telescope. In addition, a level is usually installed in this mount as well, to ensure that the bow is held straight when shooting the arrow.

Naturally these sights do not only offer advantages, but also have disadvantages which manifest themselves when it is raining. When it is raining, raindrops will fall on the lens from time to time, which break the light and make it impossible to continue shooting. It is not possible to wipe off the lens prior to shooting again, because this causes the lens to immediately fog up.

The current situation to cope with this problem is that the archer uses plastic bags, cases for eyeglasses, or similar devices to cover the sights, which are very complicated to handle. Moreover, the lens fogs up just the same due to the sealed in air and humidity.

There are also covers being used which are fastened to the optics with a rubber band, similar to a roof; however, the disadvantage here is that the sights face up when the bow is put down, thus leaving the sights unprotected again.

Presently, there is no cover which offers reliable protection for the optics from the elements when the arrow is being shot as well as when the bow is put down.

This invention is a result of the problem that there is no cover for sights which offers protection from weather conditions when shooting the arrow, as well as when the bow is put down. This new cover automatically covers the sights in any position of the bow.

In order to withstand distortion from weather including falling precipitation, the optics must be reliably covered. This is achieved by a cover which is suspended like a pendulum and by way of gravity automatically moves over the optics.

Since the cover does not influence the shooting results at all and offers protection from weather influences as well as from reflections of sunlight and artificial light, it is equally suited for outside use and indoor use.

An example of the invention is shown in the accompanying drawings, in which:

FIG. 1 shows a side elevational view of an archery bow including a sight with a protective cover of the invention, in the circled section;

FIG. 2 shows a front elevational view of the bow sight and cover when the bow is held in the upright shooting position;

FIG. 3 shows a side elevational view of the bow sight and cover when the bow is held in the upright shooting position;

FIG. 4 shows a front elevational view of the bow sight and cover when the bow is laid down in a horizontal position; and

FIG. 5 shows a side elevational view of the bow sight and cover when the bow is laid down in a horizontal position.

FIG. 1 shows the bow as it would appear when held upright in a position to shoot an arrow. The bow includes a sight having a lens 1 . Also shown is the inventive cover 3 which is effective to protect the lens from falling precipitation and undesired rays of light.

As shown in more detail in FIGS. 2 and 3, the sight 1 is mounted to the bow by means of a bracket 2 . The cover 3 includes an upper hood portion, shown as dome-shaped and above the sight in the nature of an umbrella; a lower portion including a counterweight 5 ; and a mounting portion intermediate the hood portion and counterweight. The mounting portion includes an aperture to be received over the bracket 2 . The mounting portion may be provided with a hinge 4 including ball bearings so that the cover 3 is able to freely pivot about the bracket 2 . The cover may be prevented from moving horizontally along the bracket by means of fastenings such as nuts 6 .

As shown in FIGS. 3 and 4, the counterweight is of sufficient weight so that as the bow is tilted about a horizontal axis, the cover will pivot about the bracket so that the hood portion maintains its protective position over the sight; this will prevent precipitation from falling on the lens even when the bow is laid down during periods of non shooting. When the bow is again picked up in preparation for shooting, the lens will not be distorted by precipitation so shooting can be resumed without delay.

It is to be understood that the bow, sight, and mounting shown in the drawing are a representative example of conventional equipment, and the invention may be adapted to be used with a wide variety of existing equipment. The invention is only to be limited by the following claim.